FE-510 静电控制 静电消除器 HAKKO白光焊接拆焊
SpecificationsModel No.FE-510AC adapter output/CapacityDC 24 V 10 VADischarge methodHigh frequency AC methodHigh voltage outputAC 2,000 V approx.Ion balance±10 V or lessStatic elimination timeStraight
Specifications
| Model No. | FE-510 |
|---|---|
| AC adapter output/Capacity | DC 24 V 10 VA |
| Discharge method | High frequency AC method |
| High voltage output | AC 2,000 V approx. |
| Ion balance | ±10 V or less |
| Static elimination time | Straight louver : approx. 1.5 seconds Wide-angle louver : approx. 2.5 seconds |
| High voltage abnormality output (ALARM) | MOS FET relay non-voltage contact output Maximum current : 100 mA Applied voltage : DC 30 V or less |
| Cleaning check output (C.C) | MOS FET relay non-voltage contact output Maximum current : 100 mA Applied voltage : DC 30 V or less |
| Air flow | 1.5 to 3.0 m3/min. |
| Air flow out angle | Vertically 360° variable (every 10°) |
| Amount of generated ozone | 0.04 ppm or less |
| Operating environment | Ambient temperature / humidity range : 0 to 40°C, 15 to 65% (without condensation) |
| Material for discharge needles | Tungsten |
| Dimentions | 150 (W) × 182 (H) × 50 (D) mm (without stand) |
| Weight | Approx. 0.79 kg |
AC Adapter
| AC adapter output/Capacity | DC 24 V 1 A |
|---|---|
| Dimensions | 34 (W) × 72 (H) × 51 (D) mm |
| Weight | Approx. 100 g |
Weight is measured with stand.
Typical value measured (before shipment) at a distance of 300 mm from the center of the fan outlet with the maximum flow rate.
Quantity of produced ozone measured at a point 150 mm away from the center of the fan outlet.